DP-014
January 2007
8178632
Delivery & Installation Pointer
January 2007
Microwave Installation Kits Change
Microwave Hood Combination
ISSUE:
On some models, the quantities of the toggle bolts may not match the actual number of parts shipped in the mounting
hardware kit.
BACKGROUND:
Recently there has been a change to the bolt and toggle nuts quantities in installation hardware pack.
The installation instructions indicate this is the quantity for installation bolts and toggle nuts. (See Figure A).
Figure A
There is a change to the quantities shipped in the hardware pack.
The current hardware pack contains the following quantities
¼-20 x 3” bolts (4)
Toggle nuts (2)
The reduction in bolts will not affect the mounting or holding capabilities of the wall bracket. It is still required to secure
the mounting bracket to the wall studs using the lag screws provided.
|