INTRODUCTION
Dear Whistler Owner,
TABLE OF CONTENTS
If you have questions concerning the
operation of this Whistler product
please call:
Topic
Page
3
4 - 5
6 - 7
5
For many of us, a vehicle is more than just trans-
portation. It can be a mobile office, communications
or entertainment center, or simply an expression of
our personality. Whistler products are designed to
make the time you spend in your vehicle more
productive, more fulfilling, safer, or just simply more
fun. Our mission is to provide products that improve
your driving experience.
Model Features Summary
• Features Listing of 1753 / 1763
Installation
• Mounting Guidelines
• Windshield Mounting
• Power Connection and Fuse Replacement
Operation
• Compass Calibration Set-Up Operation
• Power On And Self-Test
• Memory / Beep Confirmation
• Audio Level Adjustment
• Integrated Real Voice®
• Compass Mode
1753/176 3
LASER-RAD AR
DETECTOR
Customer Service
6
7
1-800-531-0004
8 - 16
8
9
9
9
Monday - Friday
Our new units offer not only bold new styling but
also many features not found on other detectors at any
price. We start with a proven detection circuitry with
All Band™ and added top-of-the-line features such as:
8:00 am - 5:00 pm CT
10
10
or visit our website
www.whistlergroup.com
•
Whistler’s exclusive Safe Driving System
Incorporates the Safety Warning System (SWS),
keeping you informed of road hazards as well as
our unique Stay Alert system, it tests your alert-
ness on long solo trips.
• Auto Quiet / Quiet Mode
• City Mode
• Dim/Dark Mode
10 - 11
11 - 12
12
• Engaging / Disengaging VG-2 Detection
• Stay Alert
13
13
14
16
16
17
17
17
17
18
19
19
20
20
21
22
Please keep the receipt in a safe place.
You may register your product online at
• Option Select Mode
• Teach / Tutorial Mode
• Vehicle Battery Saver Mode
Radar, Laser and VG-2 Alerts
• Radar Alerts
•
High Visibility Text Display - Shows laser-
radar information, VG-2 alerts, SWS messages
and detector settings.
www.whistlergroup.com
•
•
Real Voice® - (1753 only) allows you to keep
your eyes on the road.
For warranty verification purposes,
a copy of your dated store receipt
must still accompany any unit sent in
for warranty work. If the unit is
returned without a dated store receipt an
out of warranty service charge applies.
• Pulse Protection®
• Laser Audio / Visual Alerts
• Safety Warning System™
• VG-2 Audio / Visual Alerts
• Alert Priority
Digital Compass
-
(1763 only) provides
cardinal points and direction in
increments.
5
degree
The Whistler Group, Inc.
Corporate Headquarters
13016 N. Walton Blvd. • Bentonville, AR 72712
Tel (479) 273-6012 • Fax (479) 273-2927
• Reset Features
Even though these units are packed full of
features, they’re still very easy to use. To fully utilize
your unit to its potential, we recommend reading this
entire manual or visit our FAQ page on our web site
www.whistlergroup.com.
• Care and Maintenance
Troubleshooting Guide
Are Detectors Legal?
Speed Monitoring Technologies
• Radar Facts
Note: Your warranty period begins at the
time of purchase. The warranty is
validated only by the dated store
receipt! Now is the time to record the
serial number of the unit in the space
provided in the warranty section of
the manual.
23
23
24
25
Customer Return Center
1201 N. Dixieland Rd. • Rogers, AR 72756
Consumer Relations Tel (800) 531-0004
Note: On 1763 model the compass must be
calibrated before use! See Compass Calibration
set-up section.
• Laser Facts
• Other Speed Detection Systems
• Radar Detector Detectors
Warranty Information
Specifications
25
P/N 203332©2003 The Whistler Group, Inc.
26 - 28
29
Enjoy your new Whistler and please drive safely.
Sincerely,
Accessories
30
The Whistler Group, Inc.
W HISTLER FEATURES
W HISTLER FEATURES
W HISTLER FEATURES
Whistler’s ergonomic and user-friendly design provides
a new level of operating convenience. Special features
include:
11. High Visibility Text Display – Provides distinct
visual confirmation of signals detected such as
VG-2 Laser, X-Band, K-Band, Ka-Band, Highway
Mode, City Mode, Signal Strength, and Compass.
1. Bracket Release Button – Provides quick and
easy release of the mounting bracket.
Note: Not all units have all features described.
2. Speaker – Provides distinct audio warnings for X,
K, Ka band radar, safety radar, laser and VG-2.
3. Mounting Bracket Location - Slot holds mount-
ing bracket firmly.
INSTALLATION
4. Radar Antenna - Compact, high-efficiency anten-
na receives radar signals.
Mounting Guidelines
•
Mount the unit as low and level as possible near
the center of the windshield. Unit must be level for
compass to function properly.
5. Laser Antenna (Front) - High gain optical lens
provides increased sensitivity and field o.
6. Laser Antenna (Rear) - An integrated optical
waveguide provides superior detection of laser
signals transmitted from behind.
•
Do not mount your unit behind wipers, ornaments,
mirrored sunscreens, etc. These obstructions have
metal surfaces which can affect radar and laser signals
and reduce critical warning time. (Regular tinted
glass does not affect reception.)
7. CITY/CITY 1/CITY 2 Button - Switches out of
highway mode to reduce the annoyance of false
alerts typically encountered in urban driving areas.
•
Some windshields have an Instaclear™ or Electriclear™
type coating, which affect radar signals. Consult your
dealer or the owner’s manual supplied with your vehi-
cle to determine if your windshield has this coating.
8. Quiet Button - Pressing QUIET before a signal is
detected engages Auto Quiet Mode which
automatically reduces the audio level after the
initial warning to
a
low audio level setting.
•
•
Avoid placing unit in direct contact with windshield.
Pressing QUIET during a radar/laser encounter
silences audio alerts, while allowing visual alerts
to keep you informed.
To reduce the possibility of theft, conceal your unit
when not in use.
9. Power/Dim/Dark/Button – Turns unit on/off and
engages Dim/Dark modes (press and hold for
2 seconds).
10. Volume Up/Down Buttons – Adjust volume up or
down. Pressing both buttons enters compass
calibration mode (1763 only).
- 3 -
- 4 -
- 5 -
OP ERATION
OP ERATION
Engaging/Disengaging VG-2
OP ERATION
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Compass Select,
Abbreviated Power Up Sequence and VG-2 Mode.
In City Mode, weak speed/safety radar signals give an
initial alarm of two beeps, and then remain quiet unless
the signal becomes very strong. When the signal
strength increases, two additional beeps are provided. In
City 1 Mode, only the X band sensitivity is lowered. In
Mode, X-band is not detected. CAUTION:
When selecting this mode, some towns/small cities may
still be using X band radar.
See option select mode to turn this feature on.
Stay Alert Feature
The Stay Alert Feature is designed to test a driver’s
alertness. To engage (when unit is not alarming) :
When selecting options, the
,
or quiet must be
City
2
pressed within 20 seconds or options mode will
automatically be exited. To enter:
•
Press and hold City for approximately 2 seconds.
Release button during or immediately after the alert is
given. Display reads:
If Auto Quiet is engaged in City 1 or City 2 modes and
the unit receives a strong radar signal, the unit performs
the Auto Quiet feature. City Modes do not change the
audio alert for laser or VG-2.
1763 Chart
RUALERT
Press: Quiet
For 2 Seconds
Display
Reads:
Press to Option:
Change:
Within 30-60 seconds two beeps are sounded; to show
alertness, the driver must press either the City or Quiet
button within 3-5 seconds. If the button is pressed
within 3-5 seconds, the cycle is repeated.
Combo =
Radar and Compass
COMBO
Dim / Dark Mode
Dim/Dark Mode reduces the illumination of the display.
or
Radar = Radar Only
Compass = Comp
•
Press and hold Power for
2
seconds to reduce
illumination to a Dim setting. Display reads:
If a button was not pressed within 3-5 seconds alarm
sounds and the display reads:
Tone 1, 2, or 3
(3 Different X, K, or
Ka patterns)
2nd Time
3rd Time
TONE 3
= yes
= no
DIM
GETREST
•
Pressing and holding the power button for 2 seconds
a second time engages Dark Mode. Display reads:
TEST
YES
= ON
X, K, Ka Audio tones.
1 beep during powerup.
•
Press Power to exit.
= OFF
WARNING!!! Stay Alert is NOT intended as
a
DARK
substitute for adequate rest. You should NOT operate a
vehicle if you are drowsy. During extended periods of
vehicle operation, you should take frequent breaks.
Improper reliance on the Stay Alert feature may result in
vehicle damage, personal injury or death. NEVER
OPERATE A VEHICLE IF YOU ARE DROWSY.
4th Time
VG-2
OFF
= ON Turns VG-2 On
= OFF Turns VG-2 Off
Dim or dark can be engaged during an alert. In Dark
Mode, the display goes dark for as long as a signal is
being detected and for 20 seconds after, then the display
returns to the dimmer setting.
5th Time
6th Time
SR
= ON Turns SWS On
= OFF Turns SWS Off
•
Pressing and holding the power button a third time
restores full illumination to the display.
ON
B SVR
ON
= ON Battery Saver On
= OFF Battery Saver Off
- 12 -
- 13 -
- 14 -
OP ERATION
RADAR ALERTS
Speed Radar Audio / Visual Alerts
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
OP ERATION
Teach/Tutorial Mode
Provides simulated alerts for each type of
signal.
• Press City and Quiet simultaneously and
release. Display reads:
1753 Chart
Press: Quiet
For 2 Seconds
Display
Reads:
Press to Option:
Change:
Tone 1, 2, or 3
TONE 3
(3 Different X, K, or
Ka patterns)
or
Ka Band
Detected
TEACH
Display
X, K, Ka Audio tones.
1 beep during powerup.
2nd Time
3rd Time
TEST
= yes
= no
• Press Power to exit.
Digits
ramp
1-9
Ka
9
Vehicle Battery Saver Mode
VG-2
OFF
= ON
Turns VG-2 On
The Vehicle Battery Saver Mode automatical-
ly shuts off your detector within 3 hours if you
forget to turn it off. The timer is reset if the
detector is turned off, unplugged or any button
is pressed before the 3 hours have expired. The
detector will alert you with an audible and
visual warning before it shuts off. Display
reads:
= OFF Turns VG-2 Off
1 = weak signal, 9 = strong signal
4th Time
SR
= ON
Turns SWS On
Pulse Protection®
ON
= OFF Turns SWS Off
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded and
the display reads:
5th Time
6th Time
VOICE
ON
= ON
Real Voice engaged
= OFF Real Voice
disengaged
PULSE
PWR OFF
After 3 seconds standard alert pattern continues.
During this warning you can reset the unit by
pressing any button. This will reset the timer.
B SVR
= ON
Battery Saver On
= OFF Battery Saver Off
If the unit has automatically turned itself off,
press the Power button to turn the unit back on.
You can manually engage the Vehicle Battery
Saver Mode by pressing and holding the City
button until one beep is heard.
LASER ALERTS
* Factory Settings.
Press Power anytime to exit.
Laser Audio / Visual Alerts
When a laser signal is detected the word “Laser” and
signal strength is displayed, the audio alert is continuous
for a minimum of 3 seconds. Example:
Refer to “Option Select Mode” for instruc-
tions for deactivating battery saver mode
feature.
LASER
The more “|||” the closer the laser source.
- 16 -
- 17 -
- 15 -
SAFETY RADAR
VG-2 ALERTS
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode
before it will detect VG-2.
RESET FEATURES
Reset Features
In communities where transmitters are located,
the Safety Warning System™ displays over 60 text
messages. When Safety Radar is detected the audio
alert is geiger counter-like.
All user features can be reset to factory settings.
• Unplug Power Cord from unit.
• Press and hold Power and Quiet.
• Plug Power Cord into unit.
• Wait for 2 beeps.
• Release Power and Quiet buttons.
Unit is now reset.
When a VG-2 signal is detected, the detector “hides” its
own radiated signal and becomes undetectable by the VG-2.
Safety Warning System Text
Example: Poor - Road - Surface.
VG2 VG2
Text message confirms detection of VG-2.
CAUTION
POOR
1. Audio to level (4).
Every 30 seconds, the detector checks for a VG-2 signal.
If a VG-2 signal is still present, the unit continues to hide
and repeats the VG-2 alert. If no signal is detected, two
beeps are provided, indicating an “all clear” condition.
During VG-2 Alert X, K, and Ka band signals cannot be
received (Reference page 25 for VG-2 information).
2. Display reads Highway.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Combo ON (1763 only).
7. Safety ON.
ROAD
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
8. Vehicle Battery Saver ON.
9. Full Power Up sequence.
10. Default TONE 3.
SURFACE
Note:
11. Unit ON or OFF.
Not all areas have Safety Warning System™ transmitters.
NOTE: Must calibrate compass after resetting features
(1763 only).
Example:
Care and Maintenance
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
During the summer months, avoid prolonged exposure
to direct sunlight by removing your unit from the dash
when your vehicle is parked for an extended period of
time.
Do not spray water, cleaners or polishes directly onto
the unit. The spray may penetrate through the openings
and damage the unit. Also, do not use any abrasive
cleaners on the unit’s exterior.
- 18 -
- 19 -
- 20 -
TROUBLESHOOTING
ARE DETECTORS LEGAL?
SP EED M ONITORING TECHNOLOGIES
FCC ID HSXWH14 - 1753
FCC ID HSXWH13 - 1763
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide or
our FAQ page at
PROBLEM:
No display or audio.
• Check fuse in Whistler plug; replace if
necessary with a 2 amp 3AG type.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
www.whistlergroup.com
• Check fuse for lighter socket; replace if
necessary.
please call
1. This device many not cause harmful interfer-
rence.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
• Make sure lighter socket is clean.
Whistler Customer Service
PROBLEM:
at
Unit alarms when vehicle hits bumps.
• Check for loose lighter socket; tighten
and clean.
1-800-531-0004
IMPORTANT
FCC requirements state that changes or modifica-
tions not expressly approved by Whistler could
void the user’s authority to operate the equipment.
before returning your unit for service.
• Check connections at both ends of power cord
Substitute another cord to determine if cord is
defective. Return defective cord to the factory.
In Most States YES!
PROBLEM:
Laser/radar detectors are legal in every state
(with the exception of Virginia and Washington,
D.C., which have local regulations restricting
the use of radar receivers in any vehicle) when
used in automobiles or light trucks (under
10,000 lbs.). Similarly, when used in automo-
biles or light trucks, radar detectors are legal in
almost every state. Exceptions are Virginia and
Washington, D.C., which have local regulations
restricting the use of radar receivers in any
vehicle.
Unit alarms when using vehicle equipment or
electrical accessories (brakes, power mirrors / windows,
directionals,horn, etc.).
Radar Facts
A radar gun operates by transmitting radio waves
at certain frequencies which reflect off objects and
are then picked up by the radar gun’s receiving
section. When a radar beam reflects off a moving
target, a measurable frequency shift occurs. The
radar unit converts this shift into miles per hour to
determine your vehicle’s speed.
• Vehicle’s electrical system, including battery
and alternator, may have electrical noise. Install
a filter capacitor (470mfd. 25 volt or larger
capacitance value) on the back of the lighter
socket.
PROBLEM:
Audio alerts are not loud enough.
• Cancel Auto Quiet Mode or City Mode.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
guns at:
• Check audio level setting (see page 9).
X Band
K Band
Ka Band
(10.500 - 10.550 GHz)
(24.050 - 24.250 GHz)
(33.400 - 36.000 GHz)
PROBLEM:
Concerning trucks over 10,000 lbs., the
Federal Highway Administration (FHwA)
issued a regulation, effective January, 1994
which prohibits radar and laser detector use in
these types of vehicles nationally. Prior to the
FHwA regulation, laws existed in the state of
New York restricting the use of radar detectors
in trucks over 18,000 lbs. and in Illinois in
trucks over 26,000 lbs.
No X band signals.
• Cancel City 2.
PROBLEM:
Note: A radar detector will not alarm if an officer
is not transmitting on any one of the above radar
bands.
Unit gives laser alert when accelerating.
• Possible bad or low quality distributor cap.
Replace with high quality cap.
- 21 -
- 22 -
- 23 -
SP EED M ONITORING TECHNOLOGIES
SP EED M ONITORING TECHNOLOGIES
W ARRANTY INFORM ATION
Laser Facts
Other Speed Detection Systems
Consumer Warranty
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles.
In contrast, a laser gun can target a specific
vehicle out of a line of traffic and determine its
speed.
Several techniques other than radar or laser are used to
measure vehicle speeds. When these methods are being
used, no detector can provide a warning. These techniques
include:
This Whistler Radar/Laser detector is warranteed to
the original purchaser for a period of one year from
the date of original purchase against all defects in
materials and workmanship. This limited warranty
is void if the unit is abused, modified, installed
improperly, if the housing has been removed, or if the
serial number is missing. There are no express
warranties covering this product other than those set
forth in this warranty. All express or implied
warranties for this product are limited to one year.
Whistler is not liable for damages arising from the
use, misuse, or operation of this product.
• Pacing - A patrol car drives behind you and matches
your driving speed.
The advantage of laser over radar in terms of
target identification is the result of the laser
gun’s narrow beam. A radar transmission can
• Vascar / Aircraft - The time it takes a vehicle to
travel a known distance is measured.
cover more than
a
four-lane highway at
a
Radar Detector Detectors (VG-2)
distance of 1,000 feet, compared with a laser
transmission which covers about 3 feet at the
same distance.
The Interceptor VG-2, or simply VG-2, is a microwave
receiver used by police to detect signals radiated by the
local oscillator of a radar detector. Because its purpose is
to identify persons driving with radar detectors, the VG-2
is known as a “radar detector detector”.
Service Under Warranty
During the warranty period, defective units will be
repaired without charge to the purchaser when
For best protection, keep these points in mind:
• Because your vehicle’s license plate or
headlights are the laser gun’s primary
targets, mounting your Whistler detector
on the dashboard can improve laser
detection at short range.
returned with
a
dated store receipt to the address
The VG-2 is the primary tool used by the police to
identify radar detector equipped vehicles. If caught, in a
state where detectors are illegal, (see page 22), drivers risk
below. Units returned without a dated store receipt
will be handled as described in section “Service Out
Of Warranty.” Due to the specialized equipment
necessary for testing a radar/laser receiver, there are
no authorized service stations for Whistler brand
detectors other than the factory.
losing their radar detector and receiving
a
fine. In
addition, instant-on radar is almost always used in
combination with a VG-2, leaving unsuspecting motorists
vulnerable to receiving two tickets — one potentially for
speeding, the other for possession of a detector. Having a
radar detector capable of detecting the VG-2 may alert
you to the presence of a speed trap.
• Do not follow closely behind any vehicle
you can not see through. If you can’t see
past a vehicle ahead of you, chances are
your detector won’t either.
When returning a unit for service under warranty,
please follow these instructions:
• The receiving range of your laser detector
will not be the same as a radar detector.
Laser guns are most often used at short
range.
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured,
with return receipt requested to:
For more information on speed monitoring technologies,
please visit our FAQ page on our website:
www.whistlergroup.com
Whistler Laser/Radar detectors receive all
current laser guns which operate at a laser
wavelength of 905 +/- 10mm.
• Pro Laser™ I II III
• LT1 20-20
• Ultra Lyte
Whistler Repair Dept.
1201 North Dixieland Rd. • Rogers, AR. 72756
It is the responsibility of the individual radar detector
owner to know and understand the laws in your area
regarding the legality of the use of radar detectors.
Please allow 3 weeks turnaround time.
IMPORTANT: Whistler will not assume responsibility
for loss or damage incurred in shipping. Therefore,
please ship your unit insured with return receipt
requested.
It is the responsibility of the individual radar
detector owner to know and understand the
laws in your area regarding the legality of the
use of radar detectors.
- 24 -
- 25 -
- 26 -
W ARRANTY INFORM ATION
W ARRANTY INFORM ATION
SP ECIFICATIONS
Service Under Warranty (Continued)
Service Out Of Warranty
1753 Dimensions: 1.3"H x 2.85"W x 4.3"L
1753 Weight: 6.5 oz.
Units will be repaired at “out of warranty” service rates
when:
2. Include with your unit the following information,
clearly printed:
1763 Dimensions: 1.45"H x 2.95"W x 4.65"L
1763 Weight: 6.5 oz.
• The unit’s original warranty has expired.
• Dated store receipt is not supplied.
• The unit has been returned without its serial number.
• The unit has been abused, modified, installed
improperly, or had its housing removed.
• Your name and street address (for shipping via UPS).
• Daytime telephone number. (No P.O. Box please).
• E-mail address (if applicable).
Laser Wavelength:
905 ± 50 nanometers (nm)
• A detailed description of the problem
(e.g.,“Unit per forms self-test but does not respond to radar”).
Radar Frequencies:
The minimum out of warranty service fee for your
Whistler detector is $55.00 (U.S.). If you require out of
warranty service, please return your unit as outlined in
the section “Service Under Warranty” along with a
certified check or money order for $55.00. Payment
may also be made by MasterCard, VISA or American
Express; personal checks are not accepted.
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
• A copy of your dated store receipt or bill of sale.
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space:
Operating Temperature Range:
-20˚ C to +80˚ C (-4˚ F to +176˚ F)
s/n ___________________________________.
Units without serial numbers are not covered under warranty.
Power Requirements:
Operational 12 to 15 volts DC, 250mA nominal
Vehicle Battery Saver, 30mA nominal.
In the event repairs cannot be covered by the minimum
$55.00 service fee, you will be contacted by a Whistler
technical service specialist who will outline options
available to you. If you elect not to have your unit
repaired, it will be returned to you and your repair
fee refunded. CODs will not be accepted! Therefore,
please ship your unit insured with return receipt
requested.
IMPORTANT: To validate that your unit is within the
warranty period, make sure you keep
a
copy of
your dated store receipt. You may register your
One or more U.S. patents may apply:
for warranty verification purposes,
a
copy of your
#4,315,261
#5,146,227
#5,379,456
#5,666,120
#5,990,821
dated store receipt must accompany any unit sent in
for warranty work.
There are no authorized service stations for Whistler brand
detectors other than the Whistler factory.
IMPORTANT: When returning your unit for service,
be certain to include a daytime telephone number and
email address (if applicable).
Specifications are subject to change without
notice.
Customer Service
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call:
Customer Service
1-800-531-0004
Representatives are available to answer your questions
Monday - Friday
8:00 a.m. to 5:00 p.m (CT).
- 27 -
- 28 -
- 29 -
ACCESSORIES
The following accessories can be ordered directly
from Whistler by calling 1-800-531-0004 or visit our
online store at www.whistlergroup.com
Order
Code
Description
Price
202138
202140
206552
206553
206880
Visor Bracket
$6.95
$9.95
$14.95
$15.95
$9.95
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
Hardwire Kit (10')
(for wiring to fuse box)
206666
*Modular Cord Package
(includes coiled and straight cords,
and power adapter)
$17.95
159032
402081
206660
Package of 8 Suction Cups
Dash Pad
$2.95
$6.95
$11.95
Straight Modular Cord and
Socket Multiplier
206661
Coiled Modular Cord and
Socket Multiplier
$12.95
* Modular: Interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00.
Prices are subject to change without notice.
- 30 -
|