Model D4159
220V/240V ON/OFF
Paddle Switch
Instruction Sheet
To reduce risk of serious burns, electrocu-
tion or death when installing this switch:
• Only use this switch to replace an existing
machine switch that has the same physi-
cal configuration and equivalent electri-
cal specifications/ratings.
• Installation must only be performed by an
electrician or qualified service personnel,
and all applicable electrical codes must
be adhered to.
Figure 1. D4159 220V/240V ON/OFF Paddle
Switch.
• Turn OFF and completely disconnect all
power sources to the machine before
installing the switch.
Introduction
The Model D4159 features a recessed ON (—)
button that can be disabled with a padlock, and
a large OFF paddle that ensures fast shut-off.
The switch assembly will mount on a standard
electrical box, or over a 1" x 2" opening.
• Do not use this switch in wet or damp
locations, or near explosive fumes or
flammable liquids. It is not sealed or
rated for these environments.
Specifications
• Make sure there is a verified machine
ground on the circuit this switch is
installed.
Rated HP ..........................................2 HP
Rated Voltage ............................ 220V/240V
Rated Current .....................................16A
Padlock Shaft Size ............................... 3⁄16"
COPYRIGHT © MAY, 2014 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#16601TS
Printed in China
|