Xantech Stereo System CB18 User Manual

INSTALLATION INSTRUCTIONS  
CB18  
"THE STRIP-IR" PARALLEL CONNECTING BLOCK  
The CB18 provides a convenient way to parallel many wires onto a common 2,3 or 4 conductor bus. You  
can easily connect many home run leads from multiple IR receivers to the input terminals of a Xantech  
connecting block, or from Xantech 760-00 Match Maker™ room volume controls to the output terminals of  
a main amplifier.  
Fig. 1 The CB18  
" V G G S " L a b e l  
" L+ L- R- R+ " L a b e l  
1
2
3
4
5
6
7
8
9
FEATURES AND  
SPECIFICATIONS  
• Nine 4-terminal plug-in connec-  
tors on a 4-conductor bus.  
782-00 Power Supply  
Satellite Receiver  
To 120 V AC  
(unswitched)  
282M  
Emitter  
789-44  
VCR  
Fig. 2  
Connecting Block  
282M  
• One-in eight-out or eight-in one-  
out capability.  
Emitter  
Laser Disc  
+12 VDC  
GND  
STATUS  
IR IN  
• Adhesive backed labels are in-  
cludedforattachmenttotheplug-  
in terminals so that IR or speaker  
lead connections can be easily  
identified.  
283M Blink-IR™  
CD Changer  
283M Blink-IR™  
Mouse Emitter  
ROOM 1, EQUIPMENT CABINET, ETC.  
CB18 "THE STRIP-IR" CONNECTING BLOCK  
• High current design allows ampli-  
fiers rated as high as 500 watts to  
be used with the CB18.  
1
2
3
4
5
6
7
8
9
• Screwterminalshandlewiresizes  
from 24 to 12 gauge.  
• Dimensions: 11 1/4" x 1-1/4" x 1-  
1/4".  
GND  
+12V  
IR OUT  
INSTALLATION  
Red  
Stripe  
+12V  
+12V  
+12 VDC  
+12 VDC  
3-Wire  
IR OUT  
IR OUT  
IR OUT  
GND  
IR OUT  
GND  
When connecting an IR receiver/  
keypad system, begin by placing  
the "VGGS" labels on each of the  
terminal plugs as shown in Fig. 2 .  
"V" stands for +12 Volts, "G" for  
Gnd and "S" for Signal (IR OUT).  
This will aid you in keeping track of  
your connections.  
Ribbon  
Cable  
GND  
GND  
Smart Pad™  
ROOM 6  
780-10  
J-Box  
IR Receiver  
780-10  
J-Box  
IR Receiver  
490-00 Series  
Micro Link™  
IR Receivers  
ROOM 2  
ROOM 4  
ROOM 8  
GND  
+12V  
GND  
+12V  
IR OUT  
IR OUT  
Red  
Stripe  
+12V  
+12 VDC  
Red  
Stripe  
IR OUT  
3-Wire  
Ribbon  
Cable  
3-Wire  
Ribbon  
Cable  
IR OUT  
GND  
Fig. 2illustrateshowtheCB18may  
be used to connect 8 home runs  
from IR receivers and keypads to  
theinputterminalsofa789-44Con-  
necting Block in a 9-room system.  
GND  
Smart Pad™  
ROOM 5  
780-10  
J-Box  
IR Receiver  
480-00  
Dinky Link™  
IR Receiver  
490-00 Series  
Micro Link™  
IR Receivers  
ROOM 7  
ROOM 9  
ROOM 3  
1
 

West Bend Toaster L5748 User Manual
Westcott Camera Accessories 4893 User Manual
Western Telematic Switch AFS 16 1 User Manual
Whirlpool Freezer EH090FXK User Manual
Whirlpool Freezer EV187NYRQ02 User Manual
Whirlpool Range FES310B User Manual
Whirlpool Washer Dryer IAS5000RQ0 User Manual
Wolfgang Puck Gas Grill BCGL0050 User Manual
Yamaha Electronic Keyboard HS 501 User Manual
Zephyr Ventilation Hood ZTO M795 User Manual